Slot-type sensor

Product Feature:

1.The device has two independent outputs: All models have two independent outputs.ON when light is on and ON when light is off. It can meet different output requirementsaccording to different places of use;
2.Easy connection;
3.Wire lead: 2M flexible wire is standard, the wire length can be customized, and the bending-resistant drag chain wire-GR is optional, and the black open and white normally normallyclosed-M are optional;
4.Wide voltage range:5-24VDC;
5. High-speed response: the response frequency is 3KHZ.

Model	K Type	L Type	F Type	R Type	U Type
Detection distance	5mm (slot width)
Criterion detection object	> 0.8 * 1.2mm opaque object
Repeat Precision	< 0.03mm
Output mode	NPN or PNP open collector
Switch mode	L.on (Light entry action) / D.on (Light blocking action) Switchable
Indicator lights	When an object is detected, the light goes off, and when there is no object, the light turns on
Response frequency	3 KHz
Light source	Infrared light
Power supply	5~24V DC
Residual voltage	< 1V (When the load current is 100mA)
Consumption current	< 8mA
Protective circuit	Surge protection, reverse polarity protection
Ambient luminance	Light receiving surface illumination, incandescent lamp: < 1000lux
Ambient temperature	During work: -25°C~+55°C; When saving: -30°C~+80°C, Condensation-free
Ambient humidity	During work: 5%~85%; When saving: 5%~95%, Condensation-free
Withstand voltage	AC, 1000V for 1 minute, between all power connection terminals and the casing
Vibration resistance	10~55Hz, amplitude 1.5mm, 2 hours each in X, Y, Z directions
Insulation resistance	Between all power connection terminals and the casing, Above 20M Ω (based on DC250V)
Enclosure rating	IP50
Enclosure material	PC
Wiring method	2M 4-core cable
Model NPN	EK25NJ	EL25NJ	EF25NJ	ER25NJ	EU25NJ
Model PNP	EK25PJ	EL25PJ	EF25PJ	ER25PJ	EU25PJ

Safety Light Curtain